Whirlpool / Maytag
Whirlpool Washer F9E1 (Long Drain): Water Left in the Drum
Whirlpool and Maytag washer code F9E1 means a long drain — water was still in the drum when the drain time ran out. What the source says and the check order.
Code Reference Team
Guides by Code Reference Team
All 17 published guides on Appliance Code Lookup.
Whirlpool / Maytag
Whirlpool Washer F8E3: Overflow Past the Limit
Whirlpool and Maytag washer code F8E3 means overflow — the water level rose past the limit. What the source says and why it says to stop first.
Whirlpool / Maytag
Whirlpool Washer F8E1 (Long Fill): Too Little Water in the Time Allowed
Whirlpool and Maytag washer code F8E1 means a long fill — too little water in the time allowed. What the source says and the first checks.
Whirlpool / Maytag
Whirlpool Washer F7E1: Basket Speed Sensor / Motor Drive Fault
Whirlpool and Maytag washer code F7E1 has two meanings — a basket speed sensor fault on top-loaders and a motor drive fault on front-loaders. What the source says.
Whirlpool / Maytag
Whirlpool Washer F5E2: Lid Cannot Lock
Whirlpool and Maytag washer code F5E2 means the lid cannot lock. What the source says, how to release it, and what a repeat points to.
Whirlpool / Maytag
Whirlpool Washer F5E1: Lid Switch Reading Open
Whirlpool and Maytag washer code F5E1 means a lid switch fault — the lid reads open while the washer runs. What the source says and the first check.
Whirlpool / Maytag
Whirlpool Washer F1E1: Main Control Board Fault
Whirlpool and Maytag washer code F1E1 means a main control fault on the main board. What the source says and the first step before any test.
Whirlpool / Maytag
Whirlpool Washer F0E5 (Off Balance): Basket Could Not Reach Spin Speed
Whirlpool and Maytag washer code F0E5 means an off-balance load — the basket could not reach spin speed. What the source says and what to check.
Whirlpool / Maytag
Whirlpool Washer F0E2 (Oversuds): Foam Hiding the Water Level
Whirlpool and Maytag washer code F0E2 means oversuds — foam hides the water level from the control. What the source says and how to clear it.
Whirlpool / Maytag
Whirlpool Washer F0E1: Items in the Basket During Clean Washer
Whirlpool and Maytag washer code F0E1 means items were in the basket during the Clean Washer cycle, or the basket is overloaded. What the source says and the first check.
Whirlpool
Whirlpool Dryer PF: Power Failure Interrupted the Cycle
Whirlpool dryer code PF means a power failure interrupted the cycle. Why it is usually harmless and when repeated PF points at a supply problem.
Whirlpool
Whirlpool Dryer L2: Low or Missing Line Voltage
Whirlpool dryer code L2 means low or missing line voltage — usually one leg of the 240V supply lost. What the source says and the breaker check.
Whirlpool
Whirlpool Dryer F30: Control and User Interface Communication
Whirlpool dryer code F30 relates to communication between the control and the user interface. What the source says, and the difference between clearing and fixing.
Whirlpool
Whirlpool Dryer F28: Moisture Sensing Circuit
Whirlpool dryer code F28 relates to the moisture sensing circuit that decides when the load is dry. What the source says.
Whirlpool
Whirlpool Dryer Thermistor Codes: F22, F23, E1, E2
Whirlpool dryer codes F22, F23, E1 and E2 are thermistor or temperature sensor faults on various control platforms. What the source says, how the sensor is tested, and when to call a technician.
Whirlpool
Whirlpool Dryer F01: Main Control Board Fault
Whirlpool dryer code F01 indicates a main control board fault. Why the source advises a second opinion before replacing the most expensive part.
Whirlpool
Whirlpool Dryer AF: Restricted Airflow
Whirlpool dryer code AF means restricted airflow — the underlying cause of most other dryer failures. What the source says and how to clear the vent path.